A rolling work stool that carries its own tool storage, rated to hold 330 lbs at the seat. Height changes with a raise and lower lever on a pneumatic rod, moving the seat between 18 and 23 inches without getting off it, so the working height can follow a task down to a wheel or up to a bench edge in a second. What distinguishes it from a plain shop seat is the storage built into the base: a tool tray divided into 12 by 4.5 inch compartments keeps sockets and drivers sorted at arm's reach, and three drawers below hold the parts and consumables that would otherwise be carried back and forth across the floor. The seat swivels a full 360 degrees, so reaching a tray behind or a part to one side is a turn rather than a repositioning of the whole stool. Five universal wheels spread the load and roll in any direction, and two of them lock to hold the stool still when leaning into a job that needs steady pressure. The seat surface is smooth faux leather, chosen because grease and solvent wipe straight off it rather than soaking into fabric, over EPE foam padding for comfort through a long session. The frame combines metal with PP, plywood, and non-woven fabric components, occupies a 20.5 by 20 inch footprint, and weighs 20 lbs empty. Assembly is needed. It suits a repair shop, garage, or warehouse.