Setting a condenser on the ground rather than on a wall keeps its weight and vibration off the structure, and this powder-coated metal stand does that with a footprint adjustable in all three directions. Length opens from 3.15 to 31.71 inches, width from 3.74 to 13.19 inches, and height from 4.33 to 17.32 inches, so the frame is matched to the actual base pattern of a ductless outdoor unit instead of forcing the unit onto a fixed rail. Fully assembled, the stand measures 33.46 by 14.96 by 17.32 inches and carries up to 400 pounds. The metal frame wears a long-lasting powder coating and resists deformation under outdoor loading, while PP components take the contact points. Four anti-vibration pads sit between frame and equipment to damp compressor buzz before it travels down into the ground, and adjustable foot pads at the base take the wobble out of an uneven surface. Lifting the unit clear of the ground does the other half of the work: standing water and snow stay away from the cabinet base, and far less dirt and debris get drawn toward the coil. At 9.5 pounds the stand is light enough to reposition alone, it arrives in a single carton, and it goes together with the supplied hardware and instruction manual. Because the frame becomes the load path for a running condenser, every bolt should be brought fully tight and the foot pads leveled before the equipment is set on top.