Four anti-vibration pads are the first thing this stand puts between a running condenser and the ground, cutting the buzz a compressor otherwise sends into whatever it is bolted to. Below them, adjustable foot pads let the frame be leveled rather than shimmed, so the base finishes flat even where the ground is not. The frame itself is metal under a long-lasting powder coating, with PP components at the contact points, a pairing chosen because outdoor placement puts steady load and weather on the same part; the coating is also why the frame resists deformation season after season. Rated capacity is 400 pounds. Size is not fixed either: length adjusts across a 3.15 to 31.71 inch range, width across 3.74 to 13.19 inches, and height across 4.33 to 17.32 inches, letting one base be dialled in to the mounting pattern of a particular ductless outdoor unit, and at full extension the assembly stands 33.46 by 14.96 by 17.32 inches. Placing equipment on a raised frame instead of flat on a slab keeps water and snow from pooling around the cabinet base, and it holds dirt and debris further away from the coil that has to breathe. Everything arrives in one carton, the stand accounts for 9.5 pounds of that weight, and the hardware needed to put it together travels in the same box alongside an instruction manual, so nothing has to be sourced separately before the frame is levelled and set.