A two-seat wicker loveseat with the whole volume beneath the seat given over to storage. The cushion spans 43.5 by 20.5 by 2.5 inches, wide enough for two people to sit comfortably rather than perch, and the backrest is inclined rather than vertical so the spine is supported at an angle that suits sitting for a while. A heavy-duty metal frame under the weave takes up to 800 lbs of load. Lift the seat and a 40 gal compartment measuring 41 by 19 by 12 inches opens up, holding 150 L of cushions, covers, or garden odds and ends, and an included liner wraps the contents to keep grit and damp off them. Seat height sits at 17.5 inches from the ground, a standing-friendly height that does not require dropping into the seat or climbing out of it. The cushion cover unzips and comes off for cleaning, which matters on an outdoor seat that collects pollen and dust through a season, and fixing ties hold the cushion to the frame so it does not slide off when someone stands. The rattan is PE over metal, and the assembled bench measures 24.5 by 46 by 33.5 inches and weighs 37.5 lbs empty. Assembly is required. It fits a backyard, porch, or poolside setting, and keeping it out of prolonged rain exposure will extend its service life.